Clarion MAX685BT owner manual BUS Error, Over-current or data error

Models: MAX685BT

1 83
Download 83 pages 41.52 Kb
Page 70
Image 70

English Owner’s manual

Display

Cause

Measure

 

 

 

BUS ERROR

Over-current or data error

Turn off the ignition switch, disconnect the device,

 

is detected.

restart the engine and reconnect it again. If the

 

 

device is still not recognized, try replacing with a

 

 

different device.

 

 

 

DEVICE ERROR

The device is connected

Disconnect the device, and reconnect directly to

 

via the USB Hub.

the USB connector of this unit without using the

 

 

USB Hub.

 

 

 

DRM

WMA files protected by

Perform the operation such as skipping a file.

 

DRM are played.

(Repeat and random playback mode may be

 

 

canceled.)

NOT SUPPORT

Files not supported by this

 

 

unit are played.

 

 

 

 

If an error display other than the ones described above appears, press the Reset button. If the problem persists, turn off the power and consult your store of purchase.

• When the Reset button is pressed, frequencies of radio stations, etc. stored in memory are cleared.

68 MAX685BT

Page 70
Image 70
Clarion MAX685BT owner manual BUS Error, Over-current or data error