Clarion DXZ845MC Error Displays, English, M.Catcher, changer, not ejected, non-warped-disc, ates

English

10. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.

Take the measures described below to eliminate the problem.

	Error Display	Cause	Measure
	ERROR 2	A DISC is caught inside the CD deck and is	This is a failure of CD deck’s mechanism and
CD/MP3/WMA		not ejected.	consult your store of purchase.
	ERROR 3	A DISC cannot be played due to scratches,	Replace with a non-scratched,
		etc.	non-warped-disc.
	ERROR 6	A DISC is loaded upside-down inside the	Eject the disc then reload it properly.
		CD deck and does not play.
	ERROR 7	The format of the flash memory is damaged.	Execute ALL ERASE on the flash memory,
			and the problem is solved.
M.CATCHER
	ERROR 8	There is a failure with the flash memory.	Turn POWER/ACC off and then turn it on
			again, and the problem is solved.
			If not solved, executed ALL ERASE on the
			flash memory, and the problem is solved.
	ERROR 9	An error during recording, scratch on the	Turn POWER/ACC off and then turn it on
		disc, or error due to sound skips	again, or eject the CD. The problem is
			solved.
	AMP GUARD	The speaker protection circuit is operating.	1. Turn down sound volume. Function can
		During this operation, if any volume	also be restored by turning the power off
General		operation is performed, the display shows	and on again.
		“AMP GUARD”.	(Speaker volume is reduced automatically
			when the speaker protection circuit oper-
			ates).
			2. If the sound is muted again, consult our
			service department.
	ERROR 2	A DISC inside the CD changer is not	This is a failure of CD changer’s mechanism
changer		loaded.	and consult your store of purchase.
	ERROR 3	A DISC inside the CD changer cannot be	Replace with a non-scratched, non-warped
		played due to scratches, etc.	disc.
CD
	ERROR 6	A DISC inside the CD changer cannot be	Eject the disc then reload it properly.
		played because it is loaded upside-down.

34 DXZ845MC