CD/MP3/WMA Operations

Setting

Set to CD

Set to MP3/WMA

Disc

 

 

Mixed with CD and

Play CD

Play MP3/WMA

MP3/WMA type tracks

CD type track only

Play CD

Play CD

MP3/WMA type track only

Play MP3/WMA

Play MP3/WMA

 

 

 

2.After making these settings, remove the disc and then reinsert it.

3.When a mixed mode CD is loaded and CD is set, the track to be played first is MP3/WMA file data and no sound is heard.

Note:

When playing a CCCD (Copy Control CD), set the setting to CD type. When this is set to MP3/WWA type, the CD cannot be played normally in some cases.

Disc-In-Play function

As long as the ignition key is turned to the ON or ACC position, this function allows you to turn the power to the unit and start playing the disc auto- matically when the disc is inserted even if the power is not turned on.

Loading a CD

1.Press the [Q] button. The SLOPING CONSOLE opens.

2.Insert a CD into the center of the CD SLOT with the label side facing up. The CD plays automatically after loading.

Notes:

Never insert foreign objects into the CD SLOT.

If the CD is not inserted easily, there may be another CD in the mechanism or the unit may require service.

Discs not bearing the or mark and CD-ROMs cannot be played by this unit.

Some CDs recorded in CD-R/CD-RW mode may not be usable.

Loading 8 cm compact discs

›No adapter is required to play an 8 cm CD.

›Insert the 8 cm CD into the center of the insertion slot.

CAUTION

Be careful not to catch your hand or fin- gers while closing the SLOPING CON- SOLE.

Do not try to put your hand or fingers in the disc insertion slot. Also never insert foreign objects into the slot.

Do not insert discs where adhesive comes out from cellophane tape or a rental CD la- bel, or discs with marks where cellophane tape or rental CD labels were removed. It may be impossible to extract these discs from the unit and they may cause the unit to break down.

Listening to a disc already loaded in the unit

Press the [FNC] button to select the CD/MP3 mode.

When the unit enters the CD/MP3 mode, play starts automatically.

If there is no disc loaded, the indication “NO DISCappears in the title display.

TUNER (SIRIUS) CD/MP3

M.CATCHER

(CD changer)

AUX (TV) (DVD changer)

›The mode changes each time the [FNC] button is pressed. (Modes are not displayed for equipment that is not connected.)

MUSIC CATCHER

In the M.CATCHER mode, the files recorded in the built-in flash memory are played back. Op- erations for listening to a recording made using MUSIC CATCHER are the same as “CD/MP3/ WMA Operations”. For operations for recoding using MUSIC CATCHER, refer to the section “MUSIC CATCHER Operations”.

English

Backup Eject function

Just pressing the [Q] button ejects the disc even if the power to the unit was not turned on.

1.Press the [Q] button. Remove the disc after it is ejected.

Note:

Always close the sloping console after opening it or ejecting the CD.

Pausing play

1.Press the [ ] button to pause play. “PAUSE” appears in the display.

2.To resume CD play, press the [ ] button again.

DXZ845MC 17

Page 17
Image 17
Clarion DXZ845MC CD/MP3/WMA Operations, Disc-In-Play function, Loading a CD, Backup Eject function, Pausing play