![](/images/new-backgrounds/1181904/18190497x1.webp)
iPod Operations
Viewing video data in the iPod (only for the iPod with video)
When you connect an iPod with video by using the optional connector cable, you can enjoy the video data stored in the iPod showing them on the monitor screen of this unit (and the rear monitor if connected).
WARNING
•Some videos may be recorded at a higher volume level than desired. Increase the volume gradually from the minimal setting after the video has started.
•For your safety, the driver should not watch the video or operate the controls while driving. Please note that watching and operating the video while driving are prohibited by law in some countries.
1.Touch the [Video] key on the iPod mode screen to switch to the Video mode.
2.Play back your desired video tracks.
The specified video image will be displayed on the rear monitor if connected.
3.Touch the [Hide] key to hide the iPod mode screen.
The video image will be displayed on this unit.
4.To display the iPod mode screen, touch the screen.
•When you touch the [Music] key during playing back video data, audio playback will continue until you select the music tracks to be played in the Music mode.
Note:
•“AUDIO ONLY” is displayed when the automobile is moving.
•Do not operate the original control of the iPod in the Video mode.
•Video data may not be played back according to the status of the iPod.
•The volume setting of video data is relatively lower than audio data. Be sure to lower the volume setting before switching to the other mode.
•Do not select the categories with no track registered from the iPod Menu screen. The iPod may be frozen. If the iPod is frozen, reset the iPod by following the procedure described in the instruction manual of the iPod.
English Owner’s manual