Clarion MAX685BT owner manual Installing the Main Unit in a Nissan Vehicle, For Nissan vehicle

6. INSTALLING THE MAIN UNIT

English INSTALLATION MANUAL

This unit is designed for fixed installation in the dashboard.

1.When installing the main unit in NISSAN vehicles, use the parts attached to the unit and follow the instructions in Figure 6. When installing the main unit in TOYOTA vehicles, use the parts attached to the vehicle and follow the instructions in Figure 7.

2.Wire as shown in Section 8 (see page 77).

3.Reassemble and secure the unit in the dashboard and set the face panel and center panel.

Mounting Screw Holes (Side View of the Main Unit)
For NISSAN vehicle	For TOYOTA vehicle

Installing the Main Unit in a NISSAN Vehicle

Main Unit

Finisher (*1)

6-Spacer (thickness: 1 mm)

Mounting bracket	6-Flat head screw
	(M5 υ 8)
(1 pair for the left and right sides)
	(attached to the main unit)

Figure 6

Note:

*1 Position the face panel with its wide edge at the bottom. Fit the edge into the groove of the main unit.

74 MAX685BT