Clarion MAX685BT Turning on/off the Magna- Bass EXtend, Adjusting the High Pass Filter

English Owner’s manual

Audio Settings

Turning on/off the Magna- Bass EXtend

The Magna Bass Extend does not adjust the low sound area like the normal sound adjustment function, but emphasizes the deep bass sound area to provide you with a dynamic sound.

• The factory default setting is “OFF”

Note:

•This operation is disabled when the DZE (Digital Z- Enhancer) function is set to other than “OFF”.

3-1. Touch the [OTHERS] key to display the OTHERS tab screen.

3-2. Touch the [ON] or [OFF] key of the M-B EX item to turn the Magna Bass Extend function on or off.

Adjusting the High Pass Filter

You can adjust the cut-off frequency of the High Pass Filter for the front/rear speaker output.

• The factory default setting is “Through”.

3-1. Touch the [OTHERS] key to display the OTHERS tab screen.

3-2. Touch the [50Hz], [80Hz], [120Hz], or [Through] key of the HIGH PASS FILTER item to adjust setting.

Adjusting the Low Pass Filter

You can adjust the cut-off frequency of the Low Pass Filter for the non-fader output.

• The factory default setting is “Through”.

3-1. Touch the [OTHERS] key to display the OTHERS tab screen.

3-2. Touch the [50Hz], [80Hz], [120Hz], or [Through] key of the LOW PASS FILTER item to adjust setting.

Setting the Amp Cancel

When an external amplifier is used, using this function reduces power noises of the audio lines.

• The factory default setting is “OFF”.

3-1. Touch the [OTHERS] key to display the OTHERS tab screen.

3-2. Touch the [ON] or [OFF] key of the AMP CANCEL item to turn the Amp Cancel function on or off.

60 MAX685BT