20
Adjusting the Paper Cassette for the Paper Length
The factory default Pape r Length setting for th e Paper Cassette is on A4 s ize. To change the paper length
to Letter or Legal size, follow the steps below.
NOTE 1. If you forget to change the Recording Paper Size setting in Fax Parameter No. 23 when
different paper is installed in the cassette, the unit will Stop printing after the 1st page of an
Incoming Fax and display a "PAPER SIZE MISMATCH" error. Then, the Recording Paper Size
setting automatically adjusts to the proper size and the unit resumes printing the Incoming Fax
from the 1st page.

How to Adjust the Paper Cassette for the Paper Length

11. Remove the pape r from the Paper
Cassette and place the cassette upside
down on a flat sur face.
2. While pushing down on the release latch,
pull out the Paper Le ngth Guide.
3. Turn the Paper C assette upright.
4. Insert the Paper Length Guide hooks into
the appropriate paper length slots (Letter
or Legal) and slide the guide towar ds the
back of the cassette until it locks in place.
5. Load the paper into the Paper Cassette.
Slide the paper width guide to the left
until it lightly touche s the stack of paper
without bending the paper. The paper
must fit squarely and firmly between the
Paper Width Guide and t he right side of
tray. If it does not, the pape r may feed
into th e printer incorrec tly result ing in a
paper jam.
Caution: Make sure that the paper is set
under the metal Paper
Separation Clips and that it does
not exceed the Maxim um Paper
Capacity Mark. You can load
about 250 sheets (75g/m²
weight). For paper specification,
see page 145.
6. Replace the Paper Cassette Cover to the
appropriate paper position (LTR, A4 or
LGL).
7.
Slide the Paper Casset te into the
machine.
2The Recording Paper S ize setting of the Fax
Parameter No. 23 must match the paper
loaded in the cassette. If you change the
Recording Paper Size, pl ease change the
setting accordingly. (See page 37)
Paper Width Guide
Max. Paper
Capacity Mark
LGL
A4
LTR
Paper Length Guide
Release Latch