Panasonic UF-5100, UF-6100 appendix 129, Troubleshooting, If You Have Any of These Problems

Troubleshooting

If You Have Any of These Problems

Mode	Symptom	Cause / Action	page
During Transmission	Document doesn't	1. Check that your document is free of staples and paper	40
	feed/multiple feed	clips, and that it is not greasy or torn.	41
		2. Check that your document is the right type to send through	140
		a fax machine by consulting the list on "Documents You
		Cannot Send". If your document has the characteristics
		listed, make a photocopy of your document and send the
		copy instead.
		3. Check that the document is loaded properly.
		4. Adjust the ADF Pressure.
	Document jam	The information code 030 or 031 will appear on the display if	137
		the document becomes jammed.
	Does not stamp	1. Check if Stamp LED is lit.	43
		2. Check Fax parameter No. 04 and No. 28 settings.	36
			37
	Stamp too light	Replace stamp.	141
Transmission Copy	Vertical lines on the	Check own copy quality. If copy is OK, your machine has no	138
Quality	transmitted document	problem, report to the receiving party that they have a
		problem. If copy is NG, clean the Document Scanning Area.
	Transmitted document	1. Make sure the document is set face down.	138
	is blank	2. Check own copy quality. If copy is OK, your machine has
		no problem, report to the receiving party that they have a
		problem. If copy is NG, clean the Document Scanning
		Area.
During Reception	No recording paper	The information code 010 will appear on the display if the	18
		paper runs out.
	Recording paper jam	The information code 001, 002, 007 or 008 will appear on the	136
		display if the paper gets jammed.
	Recording paper	Make sure that there is paper in the Paper Cassette. Follow	18
	doesn't advance into	the instructions for loading paper.
	machine
	Recording paper	Check to see if the recording paper is jammed inside of the	136
	doesn't eject after	machine.
	printing
	Recording papers are	Check if Fax Parameter No. 65 is set to valid.	39
	not stacked in
	sequence. Machine
	does not print from the
	last page received.
	Document auto	Check Print Reduction settings.	68
	reduction doesn't work
	Out of toner	The information code 041 will appear on the display if the	16
		Toner Cartridge runs out of toner.

Problem Solving

Continued on the next page...

129