Panasonic UF-6100, UF-5100 appendix Receiving Documents, Reception Modes

Receiving Documents

Reception Modes

You can select one of the four modes as shown below.

Conditions	Suggested Reception Mode		Settings
You normally receive	Telephone Mode	Fax Parameter No. 17 set to 1:
only voice calls.	You can answer the incoming call via an External	Tel
	Telephone (Optional). If you receive a fax calling		dd-mmm-yyyy 15:00	00%
	signal, simply press START to receive manually.		RCV MODE=TEL
	(See page 63)
You receive both voice	Fax / Tel Auto Switching Mode	Fax Parameter No. 17 set to 3:
and fax calls.	Unit will answer the incoming call then	Fax / Tel SW.
	distinguishes whether it is voice or fax call. If it is a		dd-mmm-yyyy 15:00
	fax call, the unit will receive automatically. if it is a		RCV MODE=FAX/TEL 00%
	voice call, the unit will signal (ring) through the
	speaker for your attention. (See page 64)
You normally receive	Fax Mode	Fax Parameter No. 17 set to 2:
fax calls only.	Unit will receive the document automatically. All	Fax
	incoming calls (including a voice call) are		dd-mmm-yyyy 15:00	00%
	answered by the fax machine. (See page 65)
You receive both voice	TAM Interface Mode	Fax Parameter No. 17 set to 4:
and fax calls and a		TAM / FAX.
Telephone Answering	The TAM answers the incoming call. During that
Machine (TAM) is	time, the unit also monitors whether it is a voice		dd-mmm-yyyy 15:00
connected.	call, the TAM continues to operate. If it is a fax		RCV MODE=TAM/FAX 00%
	call, the unit will automatically switch the line to
	the Fax and begin receiving document.
	(See page 66)

NOTE

1.Depending on the model of the Telephone Answering Machine (TAM) that is connected, some of the features may not be compatible with your fax machine operating in the TAM Interface mode.

2.If you are using the "Distinctive Ring Service" provided by your local telephone company, please note that the ring pattern for your fax number must match with the setting of Fax Parameter No. 30 (DRD SERVICE). (See page 37)

If the setting does not match with the ring pattern, your machine will not receive a document automatically and the telephone will continue to ring.

Furthermore, if your TAM does not support the "Distinctive Ring Detector" service, it may not function properly in TAM Interface.

62