Panasonic UF-6100, UF-5100 appendix Sleep Mode

Customizing Your Machine

Fax Parameter Table

No.	Parameter	Setting	Setting		Comments
		Number
34	ENERGY SAVER	1	Off	To reduce the power consumption in standby, select either
	MODE			Energy-Saver or Sleep mode and specify the Delay Time
		2	Energy-
				(1 to 120 minutes) for the machine to enter into the
			Saver
				selected mode.
		3	Sleep	The Delay Timer setting is only available in the Energy-
				Saver or Sleep Modes.
				Off	: The unit will remain in standby
					mode and consume more energy
					than when in Energy-Saver or
					Sleep modes.
				Energy-Saver Mode : Saves energy by consuming less
					power than when in standby mode
					by turning off the fuser unit after
					the specified time.
				Sleep Mode	: This is the lowest power state that
					the machine enters after the
					specified time without actually
					turning off.
35	DAYLIGHT TIME	1	Invalid	Selecting whether the clock adjusts for Daylight Saving
				Time automatically. The built-in clock will advance 1 hour
		2	Valid
				at 1:00 am on the last Sunday in March and go back 1
				hour at 1:00 am on the last Sunday in October.
37	RCV TO MEMORY		(----)	Enter a 4-digit password used to print out the received
				document in memory by using F8-5 (RCV TO MEMORY).
				When F8-5 is set to On, this parameter will not be shown
				on the LCD display. (See page 93)
38	ACCESS CODE		(----)	Enter a 4-digit Access Code to secure the machine from
				unauthorized use. (See page 91)
39	PIN CODE ACCESS	1	None	Selecting the access method (Prefix or Suffix) to dial a
				number with PIN Code. (See page 98)
		2	Suffix
		3	Prefix
42	CONF. FILE SAVE	1	Invalid	Selecting whether the machine saves the confidential
				polled file even after the file is polled once.
		2	Valid
43	PASSWORD-XMT	1	Off	Setting a 4-digit XMT-Password and selecting whether the
				machine performs and checks the XMT-Password of the
		2	On
				receiving station when transmitting. (See page 103)
44	PASSWORD-RCV	1	Off	Setting a 4-digit RCV-Password and selecting whether the
				machine performs and checks the RCV-Password of the
		2	On
				transmitting station when receiving. (See page 104)
46	SELECT RCV	1	Invalid	Selecting whether the machine performs selective
				reception. (See page 101)
		2	Valid
47	REMOTE RCV	1	Invalid	Selecting whether or not the machine accepts remote
				reception command. (See page 63)
		2	Valid
48	TELEPHONE LINE	1	PSTN	Selecting the type of line connected.
		2	PBX
49	PSTN ACCESS CODE		(----)	Setting PSTN Access Code. (max. 4 digits)

38