Sending Documents
52

If your machine's memory is full or you wish to send the document immediately, use Direct Transmission.

Manual Number Dialling (Direct Transmission)

To dial the telephone number manual ly, follow the steps below.

NOTE 1. If you need a special access number to get an outside line, dial it first then press to
enter a pause (represented by a "-") before dialling the full number.
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialling and you wish to change to Tone dialling in the middle of dialling,
press (represented by a"/" ). The dialling method will be changed from Pulse to Tone after
dialling the digit "/".
Ex : 9 PAUSE * 5551234
3. To stop the transmission, press .
The display shows:
COMMUNICAT ION STOP ?
1:YES 2:NO
Press to stop the transmission. The Communication Journal will not print out regardless of
the printout mode setting of the Communication Journal.
Direct Transmission
1

Set document(s) face down.

ENTER STAT ION(S)
THEN PRESS STAR T 00%
2

MEMORY XMT=ON
1:OFF 2:ON
3

ENTER STATION
00 %
4Enter a telephone number from the keypad.

Ex:

PRESS START TO DI AL
5551234
5

Your machine starts to dial the telephone number.

* DIALLING *
5551234
8
9
1
5551234
PAUSE
STOP
1