| Frequently asked questions |
|
|
|
|
The alarm sounds. |
|
Possible fault | Solution |
|
|
The appliance door(s) have been | Close the door(s). |
open for longer than 60 seconds. |
|
|
|
The alarm sounds and the temperature display for the freezer section flashes.
The freezer door has been opened too frequently.
A large amount of food is being frozen at the same time.
This has caused the temperature in the freezer to rise above the set temperature. Once the temperature has dropped to the correct level again the alarm will stop and the display will stop flashing.
Bars light up or flash in the temperature displays.
Only temperatures within the range of the appliance can be shown in the display. Check the display again about 6 hours after turning it on.
A fault code of "F0" to "F5" appears in one of the temperature displays.
A fault has occurred. Contact Miele Technical Service.
The Super indicator light for the freezer section and the temperature display are both flashing.
A fault has occurred. Contact Miele Technical Service.
The Super indicator light for the freezer section is not on, but the refrigerator is running.
The indicator light is faulty.
Contact Miele Technical Service.
"nA" appears in the temperature display for the freezer section.
The temperature in the freezer section has risen too high at some point during the last few days because of a power failure.
^Press the alarm off button while "nA" is lit in the display.
The display will show the warmest temperature reached in the freezer during the power failure for about 1 minute. The display will then revert to the current temperature in the freezer section.
After the power failure the appliance will continue running at the last temperature set, there is no need to
29