Installing the appliance
^Screw the screw c through the fixing bracket d.
^Push the bracket towards the niche wall and tighten the screws e.
^Close the bracket f.
^Close the appliance doors.
Mounting the custom door panels
^Set a gap of 5/16" (8 mm) between the appliance door and the fixing bracket a.
^Slide the mounting aids b to the height of the custom door: The lower edge X of the mounting aids must be at the same height as the upper edge
of the custom door to be mounted (see - in the illustration).
^Unscrew the nuts c, remove the fixing bracket d and the mounting aids.
47