Miele KFN 9753 ID Installing the appliance, Carefully pull the mounting aids up and out f

Models: KFN 9753 ID

1 52
Download 52 pages 62.25 Kb
Page 48
Image 48
^Carefully pull the mounting aids up and out f.

Installing the appliance

^With a pencil, lightly mark a line down the center of the inside of the custom door.

^Hang the fixing bracket d with the mounting aids on the inside of the custom door. Align the bracket centrally.

^Secure the fixing bracket with at least 6 screws e (4 x 14 mm). (For framed doors, use only 4 screws at the edge).

^Carefully pull the mounting aids up and out f.

^Turn them around, and fit them into the middle slots of the fixing bracket g for safe keeping.

^Hang the custom door on the adjusting bolts h.

^Loosely attached the nuts c onto the adjusting bolts.

^Close the door. Check the distance between the custom door and adjacent cabinetry doors.

^Align the custom door with the adjacent cabinetry doors:

Side adjustments X are achieved by sliding the cabinetry door.

Height adjustments Y are achieved by turning the adjustment bolts h with a flathead screwdriver.

^Tighten the nuts c.

48

Page 48
Image 48
Miele KFN 9753 ID installation instructions Installing the appliance, Carefully pull the mounting aids up and out f