W8600A AIRWATCH™ Indicator
APPLICATION
The W8600A is available for use with Honeywell media or electronic air cleaners.
The W8600A function indicator panel has four liquid crystal display (LCD) arrowheads that point to Battery, Air Cleaner, UV Air Treatment, and Humidifier. (See Fig. 1.) A blinking arrowhead indicates service is needed.
INSTALLATION INSTRUCTIONS
AM | System |
|
| Heat |
|
Tue |
|
|
Wake |
|
|
DST Room | Fan | TM |
| Auto | Battery |
|
| Air |
|
| Cleaner |
|
| UV Air Treatment |
|
| Humidifier |
|
| Honeywell. |
|
| com/yourhome |
LCD
TM
Battery
Air Cleaner
UV Air Treatment
Humidifier
Honeywell.com/yourhomeFUNCTION
INDICATOR
PANEL
RESET BUTTON
M14696
Fig. 1. W8600A AIRWATCH™ Indicator features.
INSTALLATION
Location
The W8600A is designed to blend with the latest T8600 family of Honeywell Chronotherm® IV Thermostats. The W8600A can also be mounted at any other convenient location in the living area of the home. See Fig. 2.
® U.S. Registered Trademark
Copyright © 2000 Honeywell • | • All Rights Reserved |
M14697
Fig. 2. W8600A mounting location.
Mounting
These mounting instructions assume that the W8600A is mounted next to a T8600 Thermostat. When installing at another location, modify the procedure to fit the installation:
1.Remove the W8600A from the base.
2.Mark the holes for the mounting screws (provided) using the base as a template. See Fig. 3.
3.Drill the holes.
4.Position the base over the holes and install the screws.
5.Tighten the screws until the base is mounted firmly on the wall.
6.Replace the W8600A onto the base.
THERMOSTAT | W6800A BASE | |
WALLPLATE | ||
| ||
| WIRING HOLE | |
MOUNTING HOLES (2) | M14695 |
Fig. 3. Using base as mounting template.
69- 1448
