Basic Operation
Answering System Operation
Audible Indicators
Your t 2447 gives you voice prompts for feature operations and voice confirma- tions when you press a button or complete an operation.
Setting the Clock
1.Press TIME/SET. The system announces the clock setting, then announces: “To Set Day and Time, press TIME/SET.”
2.Press TIME/SET.
3.Press CHANGE until the system announces the correct day, then press TIME/SET.
4.Press CHANGE until the system announces the correct hour, then press TIME/SET.
5.Press CHANGE until the system announces the correct minute, then press
TIME/SET.
6.Press CHANGE until the system announces the correct year, then press TIME/ SET. The system announces the current clock setting.
NOTES:
1.You can choose to set the time manually, or you can allow it to be set automatically with incoming Caller ID information. The time will be set automatically only if you subscribe to Caller ID service pro- vided by your local telephone company.
2.To advance the minutes or years by increments of 10, press and hold
CHANGE.
About Mailboxes
This answering system has three voice mailboxes. Callers using a touch tone phone can select the mailbox in which their messages will be recorded by press- ing 1, 2 or 3. If the caller does not select a specific mailbox, their message will be recorded in Mailbox 1.
About Announcements
•You can record two different announcements — one for normal answering and one for when you’ve set the system to play an announcement only.
•Use normal answering when you want the system to record callers’ mes- sages. Use Announce Only when you want to give information to callers with- out accepting messages.
•If you choose not to record an announcement, the system answers with a pre- recorded announcement.
•The normal answering
to answer your call right now. Please leave your name, number and a mes- sage after the tone.” The Announce Only
•By setting Announce Only to ON or OFF, you decide which announcement your callers will hear when the system answers a call (the system comes set for normal answering, with Announce Only turned OFF). See Set Announce Only, located in the Feature Summary chart later in this section, to change your announcement selection.
22
