In Case of Difficulty

You hear noise in the Handset, and none of the keys or buttons work

Make sure the power cord is plugged in.

Common cure for electronic equipment

If the unit does not seem to be responding normally, then try putting the Handset in the cradle. If it does not seem to respond, do the following (in the order listed):

1.Disconnect the power to the Base.

2.Disconnect the Handset battery.

3.Wait a few minutes.

4.Connect power to the Base.

5.Re-install the battery.

6.Wait for the Handset to re-establish its link with the Base. To be safe, allow up to one minute for this to take place.

Your answering system is not recording messages

Make sure system is turned on (the ON/OFF key is illuminated).

Make sure Announce Only feature is set to OFF.

You cannot hear recorded messages

Using the Base volume control, raise the volume to a comfortable listening level.

CL is flashing in the Base Message Window Display

You need to set the day and time. Refer to the section on Set the Clock (see page 23) in this User’s Manual.

Additional Information

32

Page 33
Image 33
VTech T2447 user manual Common cure for electronic equipment, Your answering system is not recording messages