DX-NBKIT20-combo.fm Page 12 Friday, May 6, 2005 4:46 PM

12

Using the notebook surge protector

5If you use a dial-up modem, disconnect the telephone cable from the wall and plug it into the notebook surge protector jack labeled OUT.

In Out

6Plug one end of the supplied telephone cable into the wall telephone jack and plug the other end into the notebook surge protector jack labeled IN.

Understanding the indicators

The Power indicator is green when power is turned on.

The Surge indicator is red when surge protection is turned on.

Troubleshooting

Problem

 

 

 

 

Solution

 

 

 

 

 

 

 

 

 

 

No dial tone

• Make sure that the telephone cables are fully inserted into

 

 

 

 

the correct jacks.

 

 

 

 

 

 

 

 

 

 

Network is

• Make sure that the network cables are fully inserted into the

 

 

disconnected

 

correct jacks.

 

 

 

 

 

 

 

 

 

 

Green power indicator

• Make sure that the outlet has power and the power cord is

 

 

and red surge

 

plugged in.

 

 

indicator are not on.

Contact technical support.

 

 

 

 

 

 

 

 

 

 

 

Green power indicator

Contact technical support.

 

 

is on, but red surge

 

 

 

 

 

 

 

 

indicator is not on.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 12
Image 12
Dynex DX-NBKIT20 manual Understanding the indicators, Troubleshooting