Dynex DX-NBKIT20 manual Features, System requirements, Installing the USB hub

DX-NBKIT20-combo.fm Page 3 Friday, May 6, 2005 4:46 PM

Using the USB 2.0 4-port hub 3

Features

•Compliant with Universal Serial Bus Specification Revision 2.0 (data rate 1.5/12/480 Mbps)

•Connects up to 127 USB devices (with multiple USB hubs)

•Bus power and self-power modes

•Plug-and-play

•1 upstream and 4 downstream USB ports included

•Over-current detection and protection

•1 red LED power indicator

System requirements

•Desktop or notebook computer with USB port

•One of the following operating systems (no driver needed):

•Windows® 98/SE or newer

•Mac™ OS X

Installing the USB hub

To install the hub:

1Optional: Connect the power adapter (not included) to the power jack on the hub. For more information, see “Power adapter” on page 5.

2Plug the cable into the type A connector on the computer.

3Optional: Plug the power adapter into an AC power outlet.

After you connect this hub to a computer, the computer detects the hub and installs the required drivers.