Paxar TCMPCL2PR manual Error Description Code

Models: TCMPCL2PR

1 217
Download 217 pages 52.55 Kb
Page 142
Image 142

MPCLII Packet Reference Manual

Error Description

Code

770The print motor is not ready. Call Technical Support.

771The format specified by the application was not found. Reload your application and format, and try again. If the problem continues, call Technical Support.

790Wait until the printer is idle (no batch waiting to print or not receiving data) before you send any packets. This error may occur when you try to print a test label if the printer is busy.

791The printer has an error pending. Turn off the printer. Wait 15 seconds and turn it back on. Resend the packets. If the problem continues, call Technical Support.

792The printer is not initialized. Call Technical Support.

793The printer job queue is full. Turn off the printer. Wait 15 seconds and turn it back on. Resend the packets. If the problem continues, call Technical Support.

Errors numbered 900-911 occur when you turn on the printer. They may indicate a circuit board failure. Errors numbered 930-940 are errors that may occur during the loading of flash memory. Errors numbered 950-999 indicate a circuit board failure. Call Technical Support if you receive any of these messages.

900RAM test failure.

901ROM/EPROM checksum failure.

902Software timer failure.

903Software interrupt failure.

9-20

Page 142
Image 142
Paxar TCMPCL2PR manual Error Description Code