Chapter 3. Configuring the Printer

Defining the System Setup Packet –––––––––––––––––––––––––––––

Use the system setup packet (A) to select the power up mode, display language, print separators between batches, print a "slashed zero," and select the symbol set.

Syntax {I,A,powup_mode,language,sep_on,slash_zero symbol_set p}

A1. A

System Setup Packet

A2. powup_mode Online Mode. Options:

0online mode

1offline mode (9494/9446/1460)

A3. language Display Language. Options:

0English

1French (9446/1460)

2 German (9446/1460)

3 Spanish (9446/1460)

A4. sep_on Batch Separators. Options:

0Does not print a separator.

1Prints a separator (9494/9490/9446)

A5. slash_zero Slash Zero. Options:

0Print a standard zero

1Print a zero with a slash through it.

NOTE: The scalable font does not print a slashed zero.

A6. symbol_set Symbol Set. Options:

0Internal/ Monarch

1ANSI

2Code Page 437

3 Code Page 850

NOTE: The CG Triumvirate fonts and Font #50 support only the ANSI and DOS Code 437 and 850 Page Symbol Sets. See Appendix C, "Symbol Sets/Code Pages" for more information.

See "Defaults" for the default values on each printer.

Example {I,A,0,0,1,1,0 p }

Powers up the printer in the online mode, displays prompts in English, prints a separator after each batch, prints zeros with slashes through them, and uses the internal symbol set.

3-7

Page 27
Image 27
Paxar TCMPCL2PR manual Defining the System Setup Packet, Syntax I,A,powupmode,language,sepon,slashzero symbolset p