Appendix E. Addressing a 9490 Printer

Returning to Addressed Mode

To change the printer from non-addressed mode to addressed mode:

1.Define the printer’s address by sending the communication settings packet. After a printer has been addressed, immediate commands are automatically enabled with the caret (^) as the immediate command character.

2.Select the printer by sending the immediate command, ^ADxxxxxx.

3.Send format and batch packets to the printer.

Switching Between Addressed Printers–––––––––––––––––––––––––

Depending on the supply loaded in each 9490 printer, you may need to alternate printing between several printers.

The following example shows how to select one printer, send a format, select a different printer, send a format, and then switch to the first printer. Remember to print a test label to determine each printer’s address.

Example ^AD111AAA

Selects the 111AAA

printer.

Copy TEST.fmt com1

Sends TEST.fmt to the 111AAA

 

printer.

 

^AD222BBB

Selects the 222BBB

printer.

Copy LABEL.fmt com1

Sends LABEL.fmt to

the 222BBB

 

printer.

 

^AD111AAA

Selects the 111AAA

printer.

Copy SAMPLE.fmt com1 Sends SAMPLE.fmt to the 111AAA printer.

You can change either printer’s address to 333CCC by sending:

{I,F,,,,,,"333CCC" p }

Make sure the printer you want to readdress is selected.

E-5

Page 202
Image 202
Paxar TCMPCL2PR manual Switching Between Addressed Printers, Returning to Addressed Mode