Paxar TCMPCL2PR manual Defining Non-Printable Text Fields, Example B,3,12,V,150,40,1,2,80,7,L,0 p

		Chapter 4. Defining Fields
B10. text	Appearance of text with bar code. For UPC and EAN only
	use 0-7. For all others, use 8. Options:
	0	Default
	1	No check digit or number system
	5	Number system at bottom, no check digit
	6	Check digit at bottom, no number system
	7	Check digit and number system at bottom
	8	No text, bar code only
B11. alignment Choose L, R, C, B or E to align the bar code data
	correctly in the field. B centers variable width bar codes,

which may not allow pad-character centering (Code 128, Code 39, etc.) E right justifies variable width bar codes. Maxicode must use L.

B12. field rot Field rotation. Lower left corner of field is the pivot point. Options:

0 Top of field points to top of supply (Use for Maxicode)

1 Top of field points to left of supply

2 Top of field points to bottom of supply

3 Top of field points to right of supply

NOTE: Serial bar codes printed at speeds greater than 2.5 IPS may not scan properly.

Example B,3,12,V,150,40,1,2,80,7,L,0 p

Defines a bar code field (field #3) with 12 characters of variable length starting at row 150, column 40. A UPCA bar code with a density of 2 and a height of 80 is used. The check digit and number system are shown at the bottom. The bar code is left aligned without any field rotation.

Defining Non-Printable Text Fields ––––––––––––––––––––––––––––

Non-printable text fields allow you to enter data without printing it in its entered form. Typically, non-printable fields "hold" data that later combines with other fields to form a merged field. Define non-printable text fields before you define the field where the information prints.

4-13