Paxar TCMPCL2PR manual Defining the Control Characters Packet, Example I,D,1,1,2 p

Chapter 3. Configuring the Printer

D4. decimals Number of digits to the right of the decimal. Options:

0No digits

1 One digit

2 Two digits (default)

3 Three digits

The defaults listed above are the defaults for all printers.

Example {I,D,1,1,2 p }

Prints the dollar sign, uses a secondary symbol, and places two digits to the right of the decimal.

Defining the Control Characters Packet ––––––––––––––––––––––––

Use the control characters packet (E) to change the MPCLII control characters, enable and disable the immediate commands, and change the default terminator character for job requests and ENQ’s.

Changes take effect with the first character following the end of header character } of the configuration packet. Each control character must be unique and cannot appear anywhere else in your packet, except within quotation marks. You can customize the trailer characters to work with your host.

n Wait two seconds for the new characters to take effect before sending packets using the new characters.

Use the following syntax for the control characters packet. Notice all but the first parameter are within quotation marks.

Syntax	{I,E,"ANSI_cd",string1","string2" p }
	E1. E	Control Characters Packet

3-11