Chapter 2. Designing a Format

The following table lists the non-print zones for each printer.

Printer

Top

 

Bottom

 

Left

 

Right

 

 

 

 

 

 

 

 

9490/9494

.04 inches

.16

- .19 inches

.05

- .11 inches

.05

- .11 inches

 

1.01 mm

4.1

- 4.8 mm

1.3

- 2.8 mm

1.3

- 2.8 mm

 

7.7 dots

31 - 36.5 dots

9.6

- 21.1 dots

9.6

- 21.1 dots

 

 

 

 

 

9446/1460

none

none

.06 inches

.14 inches

 

 

 

 

1.5 mm

3.6 mm

 

 

 

 

11.5 dots

26.9 dots

 

 

 

 

 

 

 

 

n The standard supply length for the 9490 and 9494 printers is six inches. The standard supply length for the 9446 and 1460 printers is eight inches.

Use the following formulas to convert inches to dots and metric:

Dots = inches x 192

Metric (1/10mm) = inches x 254

English (1/100 inch) = 100 x (dots/192)

Dots = Metric (1/10 mm) x 756/1000

Drawing Rough Sketches–––––––––––––––––––––––––––––––––––––

After you decide what information you want to print, sketch how you want the information to appear on the label. Note any areas that are preprinted on the label, such as a logo.

As soon as you know what information to include on the label, and you have a rough sketch, you can use a supply layout grid to help you layout and size your label. If you do not want to use a grid, go to "Considering Field Types" to choose what information you want on your label.

2-3

Page 17
Image 17
Paxar TCMPCL2PR manual Drawing Rough Sketches