Paxar TCMPCL2PR manual About Memory Buffers, Ram

Models: TCMPCL2PR

1 217
Download 217 pages 52.55 Kb
Page 38
Image 38

MPCLII Packet Reference Manual

About Memory Buffers ––––––––––––––––––––––––––––––––––––––

Transmit Buffer

Used to send ENQ, job, and upload

 

responses. A minimum of 5 is required.

 

The maximum is 40. This buffer must be

 

allocated as volatile (R) RAM.

Receive Buffer

Used to save data received from the host

 

before it is processed by the printer.

 

Changing this buffer size affects the

 

amount of data the printer can receive

 

without using flow control. A minimum of

 

20 is required. The maximum is 320. This

 

buffer must be allocated as volatile (R)

 

RAM.

Image Buffer

Used to image the current format. You

 

can increase or decrease the default label

 

length by manipulating this buffer. A

 

minimum of 385 is required. The

 

maximum is 2295. The Image Buffer is

 

cleared after a printer reset, even if it is

 

stored in non-volatile RAM.

 

You must have the Optional RAM installed

 

to create labels longer than the default.

 

See Chapter 2, "Designing a Format," for

 

the default label lengths. An image up to

 

11.75 inches can be created on the

 

9494/9490/9446 printers by increasing this

 

buffer. However, the maximum image size

 

for the 1460 printer/applicator is 7.5

 

inches. (The size of the tamp pad

 

determines the maximum label size

 

available for the 1460 printer/applicator.)

n You may not be able to use scalable or downloadable fonts if you have increased the image buffer by reallocating memory from these buffers into your image buffer.

3-18

Page 38
Image 38
Paxar TCMPCL2PR manual About Memory Buffers, Ram