Paxar TCMPCL2PR manual Using Data Dump

Models: TCMPCL2PR

1 217
Download 217 pages 52.55 Kb
Page 119
Image 119

Chapter 8. Diagnostics

ENQ trailer characters

RS232 trailer characters (these are the trailers for all communications, except an ENQ.)

n The ENQ/IMD, MPCL, and RS232 trailer characters can be user defined through the control characters packet. See "Defining the Control Characters Packet," in Chapter 3 for more information.

Code page (symbol set)

Print contrast

Printhead information (printhead rank or resistance in ohms.)

A Code 128 bar code filled with ASCII zeros for the 1460/9446/9494 printers or the printer’s address for the 9490 printer.

Test pattern

After you print a test label, the 9494 and 9490 printers are in "Data Dump" mode. If you do not want to perform a data dump, press the trigger two times to resume normal printing. See "Using Data Dump" for more information.

Using Data Dump–––––––––––––––––––––––––––––––––––––––––––

After printing a test label, the 9494 and 9490 printers are in "data dump mode."

n To print a test label, you need to disconnect your cable from the host.

The printer’s LED will flash, alternating amber and green. To download a data stream to the printer and print it on a label:

1.Press the trigger one time.

2.Reconnect your cable to the host.

3.Download the data stream you wish to "dump" (print out on a label).

8-3

Page 119
Image 119
Paxar TCMPCL2PR manual Using Data Dump