MPCLII Packet Reference Manual

Error Description

Code

937Invalid ASCII hex data in record. The file you downloaded is invalid. Verify the file’s integrity and reflash the printer.

938Invalid checksum. The checksum for the message’s data was incorrect. Verify the cable connection and the communication settings and repeat the flashing procedure.

939Invalid record count. A communications error occurred during the flashing procedure. Verify the cable connection and the communication settings and repeat the flashing procedure.

940Flash address is illegal. The file contains an illegal address for the data type. Validate the file and repeat the flashing procedure.

Hard Printer Failures––––––––––––––––––––––––––––––––––––––––

When a HARD failure occurs, the printer displays WARNING or POWER DOWN on the top line of the keypad display.

If this happens, record the displayed message and turn off the printer. If the problem reoccurs when you turn the printer on again, call Technical Support.

If the problem does not reoccur after you turn your printer on again, reset your printer’s SETUP options. Refer to your printer’s documentation to reset the printer’s SETUP options. Transmit your packets again.

9-22

Page 144
Image 144
Paxar TCMPCL2PR manual Hard Printer Failures