MPCLII Packet Reference Manual

T6. column Distance from the left edge of the print area to the pivot

point is the column location. Ranges:

 

English

0 - 399

 

 

 

Metric

0 - 1015

 

 

 

Dots

0 - 767

 

 

T7. gap

Number of dots between characters

 

(192 dots per inch). Range: 0-99.

 

NOTE: For monospaced fonts, the additional spacing is

 

 

 

added to the existing inter-character gap. This is

 

 

 

also true for proportionally spaced fonts, but

 

 

 

remember that the inter-character gap varies with

 

 

 

character combinations.

 

Any number other than 0 or the default number affects

 

your field width. Default spacing:

 

Standard

3 dots

 

Reduced

1 dot

 

Bold

 

3 dots

 

OCRA-like

3 dots

 

CG Triumvirate Bold varies with each letter

 

CG Triumvirate

varies with each letter

T8. font

Style of font. Options:

 

 

1

Standard

4

OCRA-like

 

2

Reduced

10

CG Triumvirate Bold

 

3

Bold

 

11

CG Triumvirate

50CG Triumvirate Bold (scalable)

NOTE: If you have purchased optional fonts, refer to the Optional Fonts Manual for valid font selectors. The scalable font (Font #50) must be purchased separately for the 9446 and 1460 printers. The scalable font does not print a slashed zero. The CG Triumvirate fonts and Font #50 support only the ANSI and DOS Code 437 and 850 Page Symbol Sets. See Appendix C, "Symbol Sets/Code Pages" for more information.

T9. hgt mag Height magnifier, 1-7(times) or 4-90points for the scalable font. If using the scalable font on the 9490 printer, the range is 4-200points. Use a magnifier of 1 with proportionally spaced fonts, because characters lose smoothness at higher magnifications.

4-4

Page 56
Image 56
Paxar TCMPCL2PR manual Dot