Paxar TCMPCL2PR manual Defining Box Fields, Example L,S,110,30,110,150,10, p

Chapter 4. Defining Fields

L7. thickness Using the chart below for reference, write the desired line thickness (1 to 99) in box L7. Measured in dots.

NOTE: Line thickness fills upward on horizontal lines, or to the right on vertical lines.

L8. "pattern" Line pattern. Only one pattern is supported on these printers. Enter "".

Example L,S,110,30,110,150,10,"" p

Defines a horizontal line field as a segment starting at row 110, column 30 and ending at row 110, column 150. The line thickness is 10 dots.

Defining Box Fields––––––––––––––––––––––––––––––––––––––––––

Use boxes to form borders or highlight items of interest. Define each box field separately. This field is not assigned a field number, but is counted as a field (keep this in mind, as the printer allows a maximum of 100 fields per format). You can define any line length and a thickness up to 99 dots, as long as the solid black print does not exceed 20 percent (for the 9490 printer) or 30 percent (for the 9494/9446/1460 printers) of any given square inch of the label.

4-21