ENGLISH
SETTING THE ROOM2 FEED SETUP
R O O M 2 F E E D S E T U P
V O L U M E M O D E |
|
|
|
|
| To select the desired volume mode. | |
|
|
|
|
| |||
F U N C T I O N S E L E C T |
|
|
|
| To select the desired ROOM 2 source. | ||
R E T U R N : B a c k | E N T E R : S e l e c t |
|
|
| |||
|
|
|
| ||||
The ROOM 2 function allows you to enjoy one source in the main room while playing another in a different room at the same time.
The analog signals from the 7.1 CH DIRECT inputs and TAPE MONITOR INs as well as the digital signals from the coaxial or optical digital input cannot be output from the ROOM2 OUTs.
When selecting the VOLUME MODE
1 | Press the CURSOR UP( )/DOWN( ) buttons to select the VOLUME MODE, then press the ENTER | |||
button. |
|
|
| |
|
|
| V O L U M E M O D E | |
| VOL. CH LEVEL |
|
|
|
|
| ENTER | V O L U M E M O D E : | Variable |
|
|
| R E T U R N : B a c k | , : S e l e c t |
| HOME THEATER MASTER |
|
|
|
|
|
|
| |
2 | Press the CURSOR LEFT( | )/RIGHT( ) buttons to select the desired volume mode for the ROOM 2 | ||
source. |
| Each time these buttons are pressed, the volume mode | ||
|
|
| ||
|
|
| changes as follows: |
|
| VOL. CH LEVEL |
| Variable : Select this when an power amplifier is connected | |
| to the ROOM 2(audio) OUTs for ROOM 2 source |
| playback. You can adjust the ROOM 2 volume |
| level with the MASTER VOLUME CONTROL |
| knob of this receiver or the VOLUME |
HOME THEATER MASTER | UP/DOWN buttons on the remote control. |
| |
| Fixed : Select this when an integrated amplifier, etc. is |
| connected to the ROOM 2(audio) OUTs. You can |
| adjust the ROOM 2 volume level on the connected |
| integrated amplifier, etc. |
Notes :
When selecting the Fixed mode, first adjust the volume level as desired in the Variable mode and select the Fixed mode. Then the volume level will be fixed to the adjusted level.
In case that an integrated amplifier, etc. is connected to the ROOM 2(audio) OUTs and the volume mode is set to Variable, if the ROOM 2 volume level is adjusted to high level on both this receiver and the connected amplifier, the ROOM 2 speaker and the connected amplifier may be damaged.
Therefore, be sure to set the volume mode to Fixed for safe operation when using amplifier or receiver with its own volume control for ROOM 2.
44
