Sherwood R-863 manual When selecting the Tone Control, Changes as follows, Tone effect

When selecting the TONE CONTROL

Press the CURSOR UP(	)/DOWN( ) buttons to select the TONE CONTROL, then press the ENTER
1 button.
	T O N E C O N T R O L
VOL. CH LEVEL	T O N E D E F E A T	:	Off
	ENTER
	B A S S ----- + -----		0 dB
	T R E B L E ----- + -----		0 dB
HOME THEATER MASTER	R E T U R N : B a c k	,	: S e l e c t
RNC-220

Note:

When the source direct function is activated, the TONE CONTROL cannot be selected.

Press the CURSOR LEFT(	)/RIGHT( ) buttons to select the desired tone defeat mode.
2
	Each time these buttons are pressed, the tone defeat mode
	changes as follows:
	On : Select this when listening to a program source without
VOL. CH LEVEL
	the tone effect.
	Off : Select this when adjusting tone for your taste .
	Note:
RNC-220	When the tone defeat mode is set to On, the tone (bass and
HOME THEATER MASTER
	treble) cannot be adjusted.
When the tone defeat mode is set to Off to adjust the tone (bass and treble)
1. Press the CURSOR UP( )/DOWN(	) buttons to select the desired tone mode.
Each time these buttons are pressed, “	” is moved to the tone defeat mode or the corresponding tone mode.

2. At the desired tone mode, press the CURSOR LEFT( )/RIGHT( ) buttons to adjust the selected tone as desired. The tone level can be adjusted within the range of -10~+10 dB.

In general, we recommend the bass and treble to be adjusted to 0 dB(flat level). Extreme settings at high volume may damage your speakers.

3. To complete tone adjustment, repeat the above steps 1 and 2.

ENGLISH

39