ENGLISH
When CD, TAPE MON or VIDEO 1~ VIDEO 4 is selected
Select the digital or the analog input as
4 desired.
DIGITAL/ANALOG
Each time this button is pressed, the corresponding input is selected as follows:
DIGITAL ANALOG
To listen to DTS, Dolby Digital or MPEG program sources in the
When TUNER or AUX is selected as an input source, the analog input is automatically selected.
Notes:
When the selected digital input is not connected. “DIGITAL” flickers, meaning no sound. (Refer to “ENJOYING SURROUND SOUND” on page 21.)
To select the digital input, you must match the connected DIGITAL IN to the corresponding input source.
(For details, refer to “When selecting the DIGITAL IN SETUP” on page 37.)
Operate the selected component for
5 playback.
When playing back the program sources with surround sound, refer to “ENJOYING SURROUND SOUND” on page 21.
Adjust the (overall) volume.
6
MASTER VOLUME
VOL.
or
DOWNUP
Adjusting the tone (bass and treble)
Select the tone mode as desired.
7
TONE MODE
Each time this button is pressed, the tone mode changes as follows:
BASS TREBLE DEFEAT OFF(or ON)
The tone display is shown for 5 seconds.
If the tone display disappears, press the TONE MODE button again.
( ) : When the tone defeat function is activated (“DEFEAT ON”), bass and treble modes cannot be selected
Note:
When the source direct function is activated, the tone mode cannot be selected.
At the desired tone mode, adjust as
8 desired.
MULTI CONTROL
At the tone defeat mode, each time the MULTI CONTROL knob is rotated, the tone defeat mode changes as follows:
DEFEAT ON : When listening to a program source
without the tone effect.
DEFEAT OFF : When adjusting the tone for your taste.
At the desired tone (bass or treble), each time the MULTI CONTROL knob is rotated, the tone level can be adjusted within the range of +10~
To complete tone adjustment, repeat the above steps and .
Extreme settings at high volume may damage your speakers.
16