Sherwood R-863 manual When selecting the Speaker Distance, Enter button

Repeat the above steps	and until the speakers are all set to the desired mode.
4
When selecting the SPEAKER DISTANCE
Press the CURSOR UP(	)/DOWN(	) buttons to select the SPEAKER DISTANCE, then press the
1 ENTER button.
			S P E A K E R D I S T A N C E
			U N I T	: Meters
			F R O N T L	: 3 . 0 m
		ENTER	F R O N T R	: 3 . 0 m
			C E N T E R	: 3 . 0 m
			S U R R . L	: 3 . 0 m
			S U R R . R	: 3 . 0 m
		R E T U R N : B a c k		, : S e l e c t
Press the CURSOR UP(	)/DOWN(	) buttons to select the unit.
2		Then “	” and “ ” are moved to the unit mode.

Press the CURSOR LEFT( )/RIGHT( ) buttons to select the desired unit.

3

Each time these buttons are pressed, “Meters” or “Feet” is selected.

Once a unit is selected, the distances are automatically changed in the selected unit.

Press the CURSOR UP( )/DOWN( ) buttons to select the desired speaker.

4

Then “ ” and “ ” are moved to its distance.

You cannot select the subwoofer, surround back speakers and the speakers set to “None”.

5	Press the CURSOR LEFT( )/RIGHT( ) buttons to enter the distance from the selected speaker to the
	listening position.

You can set the distance within the range of 0.3~9 meters in 0.3 meter intervals(or 1~30 feet in 1 feet intervals)

Repeat the above steps and until the distances are all entered.

6

ENGLISH

35