Sherwood R-863 manual English, Continued

ENGLISH

Continued

When playing some multi-channel program sources in the Extra Surround 6.1/7.1 mode.

RPT

A

EXTRA SURR.

TITLE

7.1 SURR

6.1/7.1

or

When the digital signals from the following program sources only are input in the available decoding mode, if these buttons are pressed, the corresponding surround mode will be selected.

Dolby Digital 5.1-channel sources(including THX Surround EX created using the Dolby Digital Surround EX technology) : EXTRA SURROUND mode,

DTS 5.1-channel sources : DTS ES MATRIX mode.

Press the EXTRA SURROUND 6.1/7.1 button on the front panel or the 7.1 CH SURROUND button on the remote control again to cancel the 6.1(or 7.1) surround mode.

According to whether the surround back speaker is set to “1CH” or “2CH”, the 6.1 or 7.1 mode is selected. However, when the surround back speaker is set to “None”, the Extra Surround 6.1/7.1 mode cannot be activated.

When canceling the surround mode for normal stereo operation.

STEREO

or

ST

Then the stereo mode is selected.

To cancel the stereo mode, select the desired surround mode with using the MULTI CONTROL knob or the DSP MODE button, etc.

22