Sherwood R-863 manual Setting the Surround Setup, When selecting the Source Direct

SETTING THE SURROUND SETUP

S U R R O U N D S E T U P
S O U R C E D I R E C T	:		Off	To select the source direct function for pure sound quality or not.
D E C O D I N G M O D E	:		AUTO	To select the desired decoding mode.
D O L B Y D I G I T A L				To select the desired surround mode.
C I N E M A E Q :	Off			To select the cinema EQ function or not.
R E T U R N : B a c k	,	: S e l e c t

Notes :

Only when the digital input is selected as signal input, the decoding mode and the surround mode can both be selected as desired.

When the analog input is selected, only the surround mode can be selected.

Press the CURSOR UP(	)/DOWN( ) buttons to select the desired item.
1	Each time these buttons are pressed, “ ” and “ ” are
	moved to the corresponding mode.

Press the CURSOR LEFT( )/RIGHT( ) buttons to select the desired mode.

2

Each time these buttons are pressed, the modes change as follows according to the selected item :

When selecting the SOURCE DIRECT

Only when playing program sources in analog stereo or digital 2 ch PCM format, the SOURCE DIRECT can be selected. On : Select this to achieve the pure sound quality.

When this is selected, the stereo mode is automatically selected and the pure sound that bypasses the tone circuitry will be heard.

Off : Select this to cancel the source direct function. Notes :

When the SOURCE DIRECT is set to On, DECODING MODE, surround mode and CINEMA EQ cannot be selected. When you select the 7.1 CH DIRECT as input source or the digital signals from DTS, Dolby Digital or MPEG sources, etc. are input, the source direct function is automatically canceled.

When selecting the CINEMA EQ

When 96 kHz PCM(2 channel stereo) signals are input or the source direct function is selected, the cinema EQ function can not be selected.

On : Select this to compensate for edgy or shrill movie sound tracks.

Off : Select this to cancel the cinema EQ function.

41

ENGLISH