Paxar TCMPCL2PR manual Using Online Configuration Packets, Configuration Packet Header

Models: TCMPCL2PR

1 217
Download 217 pages 52.55 Kb
Page 25
Image 25

Chapter 3. Configuring the Printer

Use a tilde (~) followed by a 3-digit ASCII code in a quoted string to send function codes or extended characters or send the 8-bit ASCII code.

You can modify formats and fields with the optional entry method. See "Optional Entry Method" in Chapter 6 for more information.

Using Online Configuration Packets –––––––––––––––––––––––––––

Use online configuration packets to change the printer settings. You can send an individual packet or a packet that contains all seven online configuration packets. You can supply all parameters for each packet. Leave the parameters blank that you do not need to change. For example,

{I,A,,,,1 p } prints a slashed zero and uses the last sent online System Setup parameters.

Make a copy of the online configuration worksheet in Appendix D, "Format Design Tools," and save the original. Packets A-F and M are listed on the worksheet.

When you turn off the printer, all the information in the online configuration packets is saved and used when the printer is turned back on. After you change printer configurations, you must resend the format, batch, or graphic to the printer before the changes take effect.

Configuration Packet Header

Always include an I, immediately after the left bracket { and before the packet identifier (A, B, C, etc.). The I parameter identifies the data stream as an online configuration packet.

n Include the I parameter with each packet if you are sending them individually. Include it only at the beginning of a data stream if you are sending multiple packets.

3-5

Page 25
Image 25
Paxar TCMPCL2PR manual Using Online Configuration Packets, Configuration Packet Header