StorageTek 6 manual Member, Dialog, Both, Console, Reconfig

This parameter should only be used in extreme situations and may not correct all error conditions. Contact StorageTek Software Support before using this parameter.

Eid

xxxxis 1 to 4 hex characters specifying the GTF event ID used for the duration of this subsystem. ‘‘E’’ is the abbreviation for this parameter. The default Eid value is E086.

Fid

xxis 1 to 2 hex characters specifying the GTF format ID used for the duration of this subsystem. ‘‘F’’ is the abbreviation for this parameter. The default Fid value is 17.

Note: Refer to “EXECParm Control Statement” on page 90 for an alternative method of specifying GTF Eid and Fid parameters.

Member

For VM, xx is the suffix of an SLSSYSxx /FILE statement in the startup job to be used as the automatic commands data set. This /FILE statement may define an MVS sequential data set or PDS member, or it may define the last /FILE statement in the startup job, specified as:

/FILE SLSSYSxx *

‘‘M’’ is the abbreviation for this parameter.

Dialog

specifies that messages can be displayed on the operator console and/or written to the system log. These messages indicate that the HSC is waiting for an active task to complete before the HSC terminates.

If Dialog is specified, one of the options must be selected. There is no default. The options for Dialog include:

Off

specifies that you do not want active task termination messages displayed on the operator console or written to the system log.

Both

specifies that messages are displayed on the operator console and written to the system log. If Dialog is not specified, Both is the default. For more information on Dialog, see ‘‘OPTION Command and Control Statement’’ in the HSC Operator’s Guide.

Console

specifies that messages are displayed on the operator console only.

Log

specifies that messages are written to the system log only.

RECONFIG

specifies this execution of the HSC will only run the Reconfiguration utility.

Chapter 3. HSC Control Statements and HSC Start Procedure 159

1st ed., 6/30/04 - 312579601