StorageTek 6 manual JCL for Entering Cartridges in a CAP, Enter Cartridges, JCL Example

Enter Cartridges

To execute the utility:

1.Delete the lines in the template that are not required, or leave the comment indicator

(*) in column one.

2.Remove the comment indicator from the desired lines.

3.Specify values for the desired parameters.

4.the parameters that are not desired.

5.Enter the command ‘‘FILE.’’

The job file is then submitted to the ACS service machine for execution.

JCL Example

The following example shows JCL for entering a cartridge(s) into a CAP. The volume(s) is placed into scratch status.

JCL for Entering Cartridges in a CAP

/JOB	jobname	SLUADMIN
/PARM	MIXED
/FILE	SLSPRINT	DEV PRNT CLASS A
/FILE	SLSIN	*
ENTER CAP(01)		SCRATCH

Output Description

Output resulting from the execution of the Enter Cartridges utility includes:

•a listing of input commands with appropriate messages when syntax errors occur (see Figure 14 on page 252)

•console messages informing the console operator when new volumes are entered

•messages associated with error conditions resulting from an unsuccessful attempt to enter cartridges

•updated library control data set containing new volumes with the proper scratch dispositions.

Chapter 4. Utility Functions 251

1st ed., 6/30/04 - 312579601