StorageTek 6 EXECParm EXECParm Control Statement, Syntax, Control Statement Name, Parameters

EXECParm

EXECParm Control Statement

The EXECParm control statement is an alternative method for specifying the GTF event ID (Eid(gtfeid)) and GTF format ID (Fid(gtffid)). The EXECParm control statement also provides a parameter that enables you to control display of the system command prefix when messages are written to the operator at the system console. This parameter controls the command prefix on WTO and WTOR messages.

Refer to “Creating an SLKJCL File for Starting the HSC” on page 157 for a description of the start procedure and how it relates to EXECParm.

Syntax
EXECParm
	Yes	,Eid(gtfeid)	,Fid(gtffid)
MSGPRFX(	No	)
,HOSTID(host-id)

Control Statement Name

EXECParm

initiates the control statement

Parameters

MSGPRFX

optionally, specifies control of whether the command prefix is to precede WTO or WTOR messages to the operator.

Yes

indicates that the command prefix is to display preceding WTO or WTOR messages to the operator.

No

indicates that the command prefix is not to display preceding WTO or WTOR messages to the operator.

Eid

optionally, gtfeid specifies a GTF event ID.

/PARM Eid(user-specified-event-id) parameter is valid for use in the HSC startup SLKJCL file as an alternative method of specifying the GTF event ID.

90VM/HSC 6.0 System Programmer’s Guide

1st ed., 6/30/04 - 312579601