StorageTek 6 manual Scrpdef, Syntax, Control Statement Name, Parameters, dataset.name, volser

SCRPDEF

4.For additional information about syntax, refer to “Control Statement Syntax Conventions” on page 439.

Syntax
SCRPDEF	DATASET(dataset.name)
		DSN(dataset.name)		VOLume(volser)	UNIT(unitname)
		,
HOSTID(		host-id	)

Control Statement Name

SCRPDEF

initiates the SCRPDEF command and control statement.

Parameters

DATASET or DSN

specifies the name of the data set containing the SCRPOol statements to be processed and, optionally, an OPTion TITLE statement. (Refer to “Scratch Subpool Control Statement” on page 100 and “OPTion TITLE Control Statement” on page 113 for details on syntax and parameters).

Note: The definition data set may contain SCRPOol, TAPEREQ, UNITATTR, VOLATTR, and OPTion TITLE statements. Only OPTion TITLE and SCRPOol statements are processed. If any other statement is encountered, an error message is issued and the statement is ignored.

dataset.name

specifies the name of the data set containing scratch subpool parameters. If the data set name includes a member name, dataset.name must be enclosed in quotes. For example,

DATASET(‘YOUR.DSN(MEMBER)’)

VOLume

specifies the serial number of the DASD volume on which the data set resides. This parameter is optional. Specify the VOLume parameter if the data set is not cataloged, or if a data set on a volume other than the volume indicated by the catalog is to be used.

Note: The volume specified must be a DASD volume.

volser

specifies the volume serial number for the definition data set.

116VM/HSC 6.0 System Programmer’s Guide

1st ed., 6/30/04 - 312579601