StorageTek 6 manual acs-id, Audit, Syntax, Utility Name, Parameters

Audit
Syntax
AUDIt	ALL
	ACS(acs-id)		Optional Parameters				YES
						APPLy(	NO	)
Optional Parameters:
LSM(lsm-list)
		PANel(panel-list)
			ROW(row-list)
				COLumn(column-list)
CAP(cap-id)		EMPTYCel	DIAGScan(	ONLY	)	INTRANs
				ALSO

Utility Name

AUDIt

specifies that an audit operation is to be performed.

Parameters

ALL

specifies that the total library is to be audited.

APPly

(YES)

specifies that the Audit operation ejects cartridges with duplicate VOLSERs, unreadable or illegal external media labels, and/or new cartridges unreadable external labels, and performs corrective actions to the control data set to reflect the physical contents of storage cells. YES is the default.

(NO)

specifies that a discrepancy listing is produced, and the control data set is not updated.

ACS

specifies that only a particular ACS in the library is to be audited.

(acs-id)

The one or two digit hexadecimal ACS identifier.

Note: If the ACS parameter is specified with no LSM parameters, the audit is performed on all LSMs in the ACS at the same time (multitasking). This is the same as running the AUDIT utility with the ALL parameter. To audit only certain LSMs within an ACS, you must code the LSM parameter with the LSM or list of LSMs.

202VM/HSC 6.0 System Programmer’s Guide

1st ed., 6/30/04 - 312579601