StorageTek 6 manual CMS Environment, Acscms Exec

SET	Change library configuration information
SLICREAT	Library control data set creation
SLIMDisk	Allocate an OS-format data set on a minidisk
SLIVInt	Initialize a volume in OS format
SLSBINIT	Create HSC startup job
SLUACtv	Activity distribution report
SLUETRac	Format trace records
SLUPErf	Reblock performance log data
TRAce	Format execution trace data
UNSCratch	Change volumes to non-scratch status
UNSElect	Unselect a volume that was left selected by HSC
VOLRpt	Volume location report

CMS Environment

For utilities that run in the CMS environment, an edit session of an EXEC 2 file is presented for you to modify. The file identifier is ACSCMS EXEC.

Note: For systems running VM ESA Version 2 or higher, utilities that are run in CMS can run in XA or XC mode with SET 370ACCOM ON. For VM ESA below Version 2, utilities run in CMS must run in 370 mode.

For example, entering:

EXEC ACS UTIL SLUACTV

produces the edit session display of this ACSCMS EXEC file:

ACSCMS EXEC

&TRACE ALL

* EXEC SLUACTV <ctlfnameSLUACTV> <ctlftypePARMS> <ctlfmode*>

If you decide not to execute the utility, then enter the XEDIT command QUIT.

To execute the utility, perform the following steps:

1.Delete the lines in the template that are not required, or leave the comment indicator

(*) in column one.

2.Remove the comment indicator (*) from the desired lines.

3.Specify values for the desired parameters.

4.Delete the parameters that are not desired.

Chapter 4. Utility Functions 175

1st ed., 6/30/04 - 312579601