StorageTek 6 Scratch Update Parameters, Invoking the Scratch Update Utilities, JCL Requirements

Scratch Update

Parameters

VOLser

specifies the list of volume serial numbers to be added, deleted, or replaced in the scratch list(s).

(vol-list)

vol-listspecifies the volume serial numbers; this can be a single volume, a list of volume serial numbers, ranges of volume serial numbers, or combinations of lists with ranges delimited by commas. The entire list must be enclosed in parentheses.

JCL Requirements

The following definitions apply to the Scratch Update utilities JCL:

SLSPRINT

output from the utility program.

SLSIN

input to the utility in the form of control cards.

Invoking the Scratch Update Utilities

The easiest way to run utilities is to execute the ACS UTIL exec by entering one of the following commands:

EXEC ACS UTIL SCRAtch

EXEC ACS UTIL UNSCratch

EXEC ACS UTIL REPLaceall

EXEC ACS UTIL SCRAtch UNSCratch REPLaceall

Execution of this last statement results in the following ACSUTIL SLKJCL file:

ACSUTIL SLKJCL File

/JOB	jobname SLUADMIN
/PARM	MIXED
/FILE	SLSPRINT	DEV PRNT CLASS A
/FILE	SLSIN	*

*SCRATCH VOLSER(vol-list)

*UNSCRATCH(vol-list)

*REPLACEALL VOLSER(vol-list)

296VM/HSC 6.0 System Programmer’s Guide

1st ed., 6/30/04 - 312579601