StorageTek 6 OPTion TITLE OPTion TITLE Control Statement, identifying-string, Syntax, Parameters

OPTion TITLE

OPTion TITLE Control Statement

The OPTion TITLE statement is used to specify an identifying string for a definition data set. The identifying string can be any information that helps the user describe the contents of the definition data set.

The OPTion TITLE statement must be placed in the definition data set; it cannot be issued as an operator command. If more than one OPTion statement is specified in the definition data set, only the identifying string of the last OPTion statement encountered is retained.

The identifying string can be displayed with HSC Display commands. Refer to ‘‘DISPLAY Command’’ in the HSC Operator’s Guide for descriptions of command syntax and parameters.

Syntax

OPTion TITLE(identifying-string)

TRACE

TRACEF

Control Statement Name

OPTion

initiates the OPTion control statement.

Parameters

TITLE

specifies an identifying string for the definition data set. If this statement is omitted, the definition data set has no identifying string associated with it.

identifying-string

specifies the identifying string. The maximum length of the identifying string is fifty characters. If the identifying string includes one or more spaces, or any characters

TRACE or TRACEF

used to control internal tracing of HSC table lookups. During problem resolution, Software Support may request that you specify one of these parameters.

Chapter 3. HSC Control Statements and HSC Start Procedure 113

1st ed., 6/30/04 - 312579601