StorageTek 6 manual lsm-id, Move, Syntax, Utility Name, Parameters, panel-list

Move
Syntax
MOVe	Parameters
Parameters:
Flsm(lsm-id)		Panel(panel-list)
		Row(row-list)
		Column(column-list)
	Volume(vol-list)
TLsm(lsm-list)
		TPanel(panel)

Utility Name

MOVe

specifies a move request.

Parameters

Flsm

The ‘‘From’’ LSMid in the format ‘‘AA:LL’’ that the cartridges are to be moved from. If you designate the Flsm parameter, you may not designate the Volume parameter.

(lsm-id)

LSM identifier name. LSMs are specified as AA:LL, where AA is the ACSid and

LLis the LSMid. An LSMid is made up of the ACSid (hexadecimal 00-FF) and the LSM number (hexadecimal 00-17) separated by a colon (:).

Panel

panel number to be moved from. This parameter has a corequisite of the Flsm parameter and is required.

An entire panel can be emptied if the Row and Column parameters are not specified.

(panel-list)

A one or two digit panel number. Ranges are not valid. This parameter cannot contain a list if a list is specified for the Row or Column parameter.

Panels specified by panel-list are excluded as destination panels if cartridges are being moved within the same LSM.

Row

list of Rows to be moved from. This parameter has a corequisite of the Panel parameter.

258VM/HSC 6.0 System Programmer’s Guide

1st ed., 6/30/04 - 312579601