StorageTek 6 manual 152-155

Table 67. Format for Total Motions and Temporary Error Counts (Continued)

Initiated and Temporary Error Motion Software Error Record

BYTE #	Description of Field
124-127	LSM 9 Temporary motion error counts (binary)
128-131	LSM 10 Robotic motions started (binary)
132-135	LSM 10 Temporary motion error counts (binary)
136-139	LSM 11 Robotic motions started (binary)
140-143	LSM 11 Temporary motion error counts (binary)
144-147	LSM 12 Robotic motions started (binary)
148-151	LSM 12 Temporary motion error counts (binary)
152-155	LSM 13 Robotic motions started (binary)
156-159	LSM 13 Temporary motion error counts (binary)
160-163	LSM 14 Robotic motions started (binary)
164-167	LSM 14 Temporary motion error counts (binary)
168-171	LSM 15 Robotic motions started (binary)
172-175	LSM 15 Temporary motion error counts (binary)
176-641	Reserved
642-643	Record type X’6506’
644-647	StorageTek identifier X’FEEDFACE’
648-651	Timestamp Table

The HSC also makes a log entry for each permanent error, codes and indicates whether or not the errors are considered permanent errors.

The record format used to log a hard fail to SYS1.LOGREC is shown in Table 68. This record is a valid ‘‘Motion Hard Fail Software Error Record’’ only under the following conditions:

•if the Record Type Field (bytes 642-643) has a value of X’6501’,

•the StorageTek identifier (X’FEEDFACE’ at bytes 644-647) is present, and

•the character ‘H’ appears at the byte 113 location.

Appendix D. Logging ACS Robotics Motion 607

1st ed., 6/30/04 - 312579601