Chapter 2. Host Software Component Functions

Chapter 2. Host Software Component Functions

Overview of HSC Functions

This chapter describes the basic function of the HSC. Functions for each of the HSC components fit within the architecture structure presented in Figure 1 on page 4. Not all of the components of the architecture structure have functions directly visible to you. Only those HSC functions that you can control or those that are operationally apparent are described in this chapter.

System functions relating to HSC architecture components represented in Figure 1 on page 5 include:

installation

initialization/termination

mount/dismount processing

volume/cell control

CAP processing

common recovery

command

utility

LMU server

communications

tape management interface (TMI)

batch application program interface.

The Automated Cartridge System provides the facilities and software to perform various functions with or without operator intervention. Such major system functions are described in this chapter.

Automatic Functions of the HSC

Among the functions handled automatically by the HSC are:

mounting and dismounting of cartridges

automatic and manual operating modes

handling of abnormal situations occurring during mounting or dismounting of cartridges

Cartridge Access Port processing to allow the operator to enter or remove cartridges

tape management system assistance

Chapter 2. Host Software Component Functions 19

1st ed., 6/30/04 - 312579601

Page 49
Image 49
StorageTek 6 manual Host Software Component Functions, Overview of HSC Functions, Automatic Functions of the HSC