StorageTek 6 manual Volume Report, INCLude

Volume Report

INCLude

optionally specifies the criteria for including volume information in the report. If this keyword is specified, all volumes that match at least one of the specified criteria are tentatively selected for the report. Information about volumes may be removed from the list of volumes selected for the report if other options, such as EXCLUDE, VOL, ACS, or LSM are specified.

Notes:

1.INCLude parameters are applied before EXCLude parameters in volume selection.

2.Parameter values are not checked for the existence of their opposite values (for example, ‘‘SEL’’ is still flagged even if ‘‘NONSEL’’ is specified, and vice versa).

3.Positive attributes are applied before negative attributes (for example, SCR is applied before NONSCR).

4.INCLude is not available if Volume Report is running under SCP.

*

indicates that all volumes in the library are considered for being included in the report. The default is *. If more than one of the following parameters is specified, the parameters must be separated by commas.

SCR

specifies that scratch volumes match the specified criteria.

NONSCR

specifies that nonscratch volumes match the specified criteria.

ERR

specifies that errant volumes match the criteria.

NONERR

specifies that non-errant volumes match the criteria.

SEL

specifies that selected volumes match the criteria.

NONSEL

specifies that nonselected volumes match the criteria.

READable

specifies that volumes with a readable external label match the criteria.

UNREADable

specifies that volumes with an unreadable external label match the criteria.

330VM/HSC 6.0 System Programmer’s Guide

1st ed., 6/30/04 - 312579601