StorageTek 6 manual Character

Table 63. SLUVVDAT Record Format (Continued)

Dec	Hex	Type	Length	Label	Description
26	(1A)	CHARACTER	2	VOLHMCEL	DECIMAL NUMBER OF THE
					COLUMN WITHIN VOLHMROW
					WHERE THE VOLUME RESIDES.
28	(1C)	CHARACTER	3	VOLSPLBL	VOLUME SUBPOOL LABEL
					TYPE
‘SL’	(E2D3)	CHAR CONST		VOLSPSL	STANDARD LABEL
‘NL’	(D5D3)	CHAR CONST		VOLSPNL	NON-LABELLED
‘AL’	(C1D3)	CHAR CONST		VOLSPAL	ANSI LABEL
‘NSL’	(D5E2D3)	CHAR CONST		VOLSPNSL	NON-STANDARD LABEL
‘ ‘	(404040)	CHAR CONST		VOLSPNON	‘ SUBPOOL INFO NOT
					REQUESTED OR NOT
					AVAILABLE
31	(1F)	CHARACTER	13	VOLSPID	VOLUME SUBPOOL ID (13-BYTE
					NAME OF POOL IF USING
					SCRPOOL STATEMENTS; 3- BYTE
					SUBPOOL INDEX NUMBER IF
					USING SLSUX03)
44	(2C)	SIGNED-HWORD	2	VOLMXCLN	VOLUME MAXCLEAN VALUE
46	(2E)	SIGNED-HWORD	2	-RESERVED-	* RESERVED *
48	(30)	SIGNED-FWORD	4	-RESERVED-(2)	* RESERVED *

THE FOLLOWING FIELDS:

VOLTDINS, VOLTDSEL, VOLTDMNT

CONTAIN THE HIGH-ORDER FULLWORD OF THE CPU TOD CLOCK VALUE WHEN

THE VOLUME WAS (RESPECTIVELY) ENTERED INTO THE LIBRARY, LAST

SELECTED, AND LAST MOUNTED.

FOR EACH OF THESE FIELDS, THE LOW-ORDER BIT (BIT 31) HAS A

VALUE EQUAL TO 2-TO-THE-20TH-POWER MICROSECONDS, OR 1.048576

SECONDS SINCE MIDNIGHT, JANUARY 1, 1900. THIS TIME IS

UNCORRECTED FOR ANY LOCAL TIME ZONE OFFSET FROM GMT. THIS IS

THE SAME FORMAT WHICH IS USED BY THE HSC TO SAVE THIS

INFORMATION.

THE VALUES IN FIELDS: VOLDTINS, VOLTMINS, VOLDTSEL, VOLTMSEL, VOLDTMNT, VOLTMMNT HAVE BEEN CORRECTED FOR LOCAL TIME OFFSET FROM GMT. THESE

TIMES (AND POSSIBLY THE DATES) MAY THEREFORE BE DIFFERENT FROM VALUES CALCULATED USING THE TOD CONTENTS IN VOLTDINS, VOLTDSEL, AND VOLTDMNT.

56	(38)	SIGNED-FWORD	4	VOLTDINS	TOD CLOCK VALUE WHEN
					VOLUME WAS INSERTED INTO
					THE LIBRARY
60	(3C)	SIGNED-FWORD	4	VOLTDSEL	TOD CLOCK VALUE WHEN
					VOLUME WAS LAST SELECTED
64	(40)	SIGNED-FWORD	4	VOLTDMNT	TOD CLOCK VALUE WHEN
					VOLUME WAS LAST
					MOUNTEDD

584VM/HSC 6.0 System Programmer’s Guide

1st ed., 6/30/04 - 312579601